Price : 0.0005044 BTC
This handle is compatible with the Switch host and also supports Windows computer devices.
No need to load any driver, the handle can be used after connecting with the Switch host.
Built-in lithium battery.
This handle supports the gyroscope axis function and the dual-motor dual vibration function.
Up to 4 wireless controllers can be connected to the host at the same time.
In the case of charging the handle, you can also play the game normally.
This handle can be upgraded with updated software by connecting to a computer.
Connect to the Switch host via Bluetooth
A. Connect the handle to the host for the first time:
Turn on the Switch host, in the host's main menu interface, touch and click Controllers → Change Grip/order with your finger to enter the host pairing mode interface Press L + R on the controller, ignore L + R; on the handle, long press "HOME "button for 5 seconds to turn on the handle and enter the pairing mode. The 4 on the handle start to flash in a rapids cycle. When a single or multiple LEDs are always on, the handle is paired with the host successfully, and then press the A button to operate.
B. Connect the handle to the host again:
Long press the HOME button for 2 seconds to turn on the handle, the handle is automatically connected to the host, and then press the A button to operate.
C. Wake up the handle:
When the handle is sleeping, short press the HOME button to wake up the handle, the handle and the host will automatically connect back, and then press the A button to operate.
1. In Android mode, there is no vibration function and no axis function.
2. In wired connection mode, there is a vibration function and no axis function.
Turbo function setting: first press and hold the function key to be accelerated, for example, A key, then press Turbo key, at this time the A key has the function of accelerating continuous hitting;
Turbo function cancellation: first press and hold the function key that has been set to accelerate, such as the A key, and then press the Turbo key, at this time the acceleration function of the A key is canceled.
Handle charge/sleep/wake up function:
a. When the handle is charged in the shutdown state (press the HOME button to turn on/off), the LED1-LED4 indicator lights flash slowly, and the lights go out when fully charged. When charging in the Bluetooth connection state, the corresponding indicator light flashes slowly and stays on when fully charged.
b. Sleep/wake-up function: the gamepad will go to sleep if not used within 5 minutes. When you need to use it again, you need to press the HOME button to wake up to connect back;
c. When the battery power is low, the corresponding indicator light flashes quickly.
Working voltage: DC3.7V-4.2V
Working current: 20-30mA
Continuous use time: 20 H
Sleep current: <80uA
Charging voltage/current: DC5V/500mA
Bluetooth transmission distance: <=8M
Battery capacity: 350mAh
Standby time: 30 days when fully charged
1. Please do not store this product in humid or high-temperature places;
2. Do not knock, beat, stick, puncture, or try to decompose the product, so as not to cause unnecessary damage to the product;
3. The built-in battery of the product should not be thrown away with garbage;
4. Do not charge the handle near fire or other heat sources;
5. Non-professionals should not disassemble this product, otherwise, it will not be covered by the after-sales warranty service.
1 x Gamepad