Price : 0.0008859 BTC
Install 0.96'' ST7735 TFT
1. Bend down 90Âdegres along the red line, and use the edge of the core plate to assist bending
2. Bend up 90Âdegres along the blue line, and use the edge of the core plate to assist bending
3. Do not bend the green line to avoid breaking the screen line
4. Double-sided adhesive tape is pasted at the installation place of the core board screen, and then screen installation can be easily completed according to the line folding pattern of the screen
Note: When pasting the installation, make sure that the screen border does not touch the electronic components on the board
- Support Sensor: OV7670, OV2640, OV7725, OV5640-AF
- If you use the OV5640 auto focus function, be sure to solder SB4, SB5
- If USING OV5640 auto focus function, be sure to weld SB4, SB5
How to enter ISP mode:
Method 1: When the power is on, press the BOOT0 key and the reset key, then release the reset key, and release the BOOT0 key after 0.5 seconds
Method 2: When the power is off, hold down the BOOT0 key, and release the BOOT0 at 0.5s after the power is on
DFU Mode: Use the data line to connect to the computer.
Serial Port Mode: Connect PA9 and PA10 of core board with USB serial port
Power supply and Board Shape:
Input Voltage: 3.3V-5.5V
DC-DC Output Current: 1A Max.
Size: 40.64mm x 66.88mm
Package1: core board +0.96 inch LCD
Package2: core board + 0.96 inch LCD + OV2640 camera + TYPE-C cable
Package3: core board + 0.96 inch LCD + OV7725 camera + TYPE-C cable
Package4: core board + 0.96 inch LCD + OV7725 M12 camera + TYPE-C cable
The information is linked to the label of the goods, no technical solution are provided, no tutorials, only routines.