M5Stack FIRE IoT Development Kit V2 6 8M PSRAM 16M FLASH 2 0 Inch Full color HD IPS Display Panel for Sale with BTC on Gipsybee.com

FREE SHIPPING!

Price : 0.0012917 BTC

SKU:
1906677
Category:
Motherboard Development Board

Note: If there is more than one choice for this product, please write to us indicating your choice. Ex. Shoe / clothing size, item color, memory, etc.
We will send you the correct product. contact@gipsybee.com

Add to Wishlist

Product Specification

Description:

M5Stack FIRE It‘ a cost-effective Wi-Fi & Bluetooth dual-mode IoT controller adopts Espressif ESP32 main control chip, equipped with two low-power Xtensa 32-bit LX6 microprocessors, with main frequency up to 240MHz. With 8M PSRAM + 16M FLASH memory, 2.0-inch full-color HD IPS display panel, IMU, LED, microphone, speaker, TFCard slot and other peripherals. The full-coverage case ensures circuit stability even in complex industrial applications. The internal offers a wide range of common interface resources (ADC/DAC/I2C/UART/SPI, etc.) which is highly expandable. This functional and powerful IoT controller is very applicable to various product prototyping, industrial control and smart building applications.

High productization:
Exquisite designs, Prototyping right into products
Product-grade full-coverage cover for more stable circuit operation
Low code development:
Support UIFlow graphical programming platform, scripting-free, cloud push
Fully compatible with Arduin0, ESP32-IDF and other mainstream development platforms
Support FreeRTOS, with dual-core and multitasking mechanism, it can perform the tasks efficiently, Program optimization.
High integration:
2.0-inch IPS display panel, 6-axis IMU, programmable RGB lights x10, microphone, speaker, custom buttons x3
Built-in Li-ion power, integrated power management chip, supports TypeC and POGO PIN
finely tuned RF circuit for stable and reliable wireless communication
Strong expandability:
GROVE expansion ports x3 (I2C, GPIO, UART)
Easy access to M5Stack software and hardware system, stackable module design, plug-and-play sensor expansion

Note:
GPIO 16 / 17 of FIRE are connected to PSRAM by default, so when you connect or stack other modules, you need to pay attention to avoid conflicts with these two pins to prevent the device from not working properly and generating instability..

Switching operations:
Power on:Click the red button on the left
Power off: Quickly double-click the red button on the left
USB power: By default, It can not be shutdown when USB power is on.

Driver Installation:

Click the link below to download the driver that matches the operating system. There are currently two driver chip versions, CP210X (for CP2104 version)/CP34X (for CH9102 version) driver compressed package. After decompressing the compressed package, select the installation package corresponding to the number of operating systems to install. (If you are not sure which USB chip your device uses, you can install two drivers at the same time. During the installation process of CH9102_VCP_SER_Mac0S, an error may occur, but the installation is actually completed, just ignore it.)

Driver nameApplicable driver chipDownload link
CP210x_VCP_WindowsCP2104Download
CP210x_VCP_Mac0SCP2104Download
CP210x_VCP_LinuxCP2104Download
CH9102_VCP_SER_WindowsCH9102Download
CH9102_VCP_SER_Mac0SCH9102Download

Features:

Based on ESP32 development
8M PSRAM + 16M FLASH memory combination
Integrated HD IPS display panel with various hardware peripherals
Rich resources interface, compatible with M5Stack stacking modules and sensors, highly expandable.
Adopt M5GO BOTTOM base compatible with 8mm size LEG0 blocks, the structure is full of fun to build.
Micros0ft Azure authentication device
Compatible with multi-platform development:
UIFlow
MicroPython
Arduin0

Package Included:

1x M5Stack FIRE
1x M5GO Charging Base
2x LEG0 Building Blocks
5x LEG0 Connections
1x M3 Hex Wrench
1x Type-C USB (50cm)
1x User's Manual

Applications:

IoT Controller
DIY creator works
Smart Home Control

Specifications:

SpecificationsParameters
ESP32-D0WDQ6-V3240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth
Flash16MB
PSRAM8MB
Input power5V @ 500mA
InterfaceTypeC x1, POGO PIN x1, I2C x1, GPIO x1, UART x1
KeysCustom Keys x 3
LCD screen2.0"@320x240 ILI9342C IPS panel, maximum brightness 853nit
Speaker1W-0928
MicrophoneAnalog BSE3729 Microphone
IMU6-axis MPU6886
USB ChipCH9102F
LEDSK6812 RGB LED x 10
Antenna2.4G 3D antenna
Battery - 500 mAh @ 3.7V
Operating Temperature0ÂdegresC to 40ÂdegresC
Net Weight62.3g
Gross Weight162g
Product Dimensions54mm x 54mm x 30.5mm
Package Size105mm x 65mm x 40mm
Cover MaterialPlastic ( PC )

EasyLoader


EasyLoader It†s a simple yet fast program burner has built-in product-related case programs, which can be burned into the master control in simple steps to verify functional and performance.


Pin Mapping:

LCD screen & TF card
LCD Pixel: 320x240 TF card support up to 16GB
ESP32 ChipGPIO23GPIO19GPIO18GPIO14GPIO27GPIO33GPIO32GPIO4
ILI9342CM0SI/MISO/CLKCSDCRSTBL
TF CardM0SIMISOCLKCS

Button & Speaker

ESP32 ChipGPIO39GPIO38GPIO37GPIO25
Button PinsBUTTON ABUTTON BBUTTON C
SpeakersSpeaker Pin

GROVE Interface A & IP5306
The power management chip (IP5306) is a custom I2C version, and its I2C address is 0x75. Click here to view the IP5306's register manual.

ESP32 ChipGPIO22GPIO215VGND
GROVE ASCLSDA5VGND
IP5306SCLSDA5VGND

IP5306 charge/discharge, voltage parameters

ChargingDischarging
0.00 - 3.40V -> 0%4.20 - 4.07V -> 100%
3.40 - 3.61V -> 25%4.07 - 3.81V -> 75%
3.61 - 3.88V -> 50%3.81 - 3.55V -> 50%
3.88 - 4.12V -> 75%3.55 - 3.33V -> 25%
4.12 - / -> 100%3.33 - 0.00V -> 0%

MPU6886 3-axis accelerometer + 3-axis gyroscope
MPU6886 I2C address 0x68

ESP32 ChipGPIO22GPIO215VGND
MPU6886SCLSDA5VGND

M5GO Base Pins:

GROVE Interface B
ESP32 ChipGPIO36GPIO265VGND
GROVE BGPIO36GPIO265VGND

GROVE Interface C
ESP32 ChipGPIO16GPIO175VGND
GROVE CRXDTXD5VGND

LED strip & microphone & speaker
ESP32 ChipGPIO15GPIO34GPIO25
hardwareSIG PinMIC PinSpeaker Pin

M5 Port Description:
PORTPINNote:
PORT-A(red)G21/22I2C
PORT-B(black)G26/36DAC/ADC
PORT-C(blue)G16/17UART

ESP32 ADC/DAC
ADC1ADC2DAC1DAC2
8 Channel10 Channel2 Channel2 Channel
G32-39G0/2/4/12-15/25-27G25G26

M-BUS



When use the RGB LEDs of GPIO15, we recommend initialize the pins Mode(15, OUTPUT_OPEN_DRAIN); For more info about pin assignment and pin remapping, please refer to ESP32 datasheet

Related Links

Datasheet


API


Schematics: click to open