Product Specification
Features:
-ã€420
x 255 mm】Just fit on a desktop with a width of 600mm, and the left side
of the machine is not limited by the size of the material. It is
suitable for processing large area materials. Under the protection of
the MEMS vibration protection sensor, the engraving and cutting
processes can be completed at the same time. The X-axis motion module is
only 120g and is driven by a 40mm thick high-performance stepper motor,
bringing a faster engraving experience than the gantry structure, 3400 x
5600 pixels, engraving accuracy: 0.075 mm dot pitch, 339 dots/inch. The
whole machine function test requires only 4 screws to complete the
installation.
-ã€Advanced laser module】
About A40640 module : The laser
beam is formed by combining two high-power laser diodes and adopts FAC
technology. The minimum focus point reaches 0.04x0.04mm(A40640 module).
Support NEJE advanced laser module, Built-in fast intelligent drive,
temperature feedback can be timely, and intelligently adjust fan heat
dissipation. Safe and quiet to use.
About N40630 module: The newly designed N40630 module can cleanly cut 3mm thick plywood in one pass, with a minimum focus point of 0.05x0.05mm, and can engrave metal by covering the layer. Built-in fast intelligent drive, temperature feedback can be timely, and intelligently adjust fan heat dissipation. Safe and quiet to use.
-ã€More
materials, clearer】 Wood, MDF, leather, paper, cotton, etc. are all
supported. 8mm plywood only needs air-assisted cutting once (A40640),
and the cutting is very clean. Can directly engrave stainless steel,
glass, transparent acrylic and so on.
-ã€Portable
professional control software]】32-bit control system, the fastest speed
can reach 200,000mm/min, supports LaserGRBL, Lightburn, NEJE software,
NEJE APP (Android, iOS, ipadOS, macOSs), you can change it by taking
photos with your mobile phone or selecting images from the album To
complete the work quickly, NEJE provides free software upgrade services.

Packing List:
1x | Laser Engraving Machine |
1x | Laser Module |
1x | 12V4A Power Supply
|
1x
| Manual
|
1x
| Goggles |
1x
| Data Cable |
1x
| Wooden Board |
5x | Paper |
1x | Pen |
1x | Brush |
1x | Focusing Film
|
4x | Angle Iron
|
1x | Alumina Film
|
3x | Cable Tie
|
5x | Nut |
1x | Large Hexagon Wrench
|
1x
| Small Hexagon Wrench
|
1x
| Open Wrench
|