FNIRSI DSO TC2 Handheld Digital Oscilloscope LCR Meter Graphic Display Transistor Tester 2 4 inch TFT Color Screen LED Backlight for Auto Repair Appliance Repair for Sale with BTC on Gipsybee.com

FREE SHIPPING!

Price: 0.0044968 BTC

Code:
GB1955385
Category:
Digital Multimeters & Oscilloscope

Note: If there is more than one choice for this product, please write to us indicating your choice. Ex. Shoe / clothing size, item color, memory, etc.
We will send you the correct product. contact@gipsybee.com

Add to Wishlist

Product Specification


Description:

FNIRSI-TC2 ingeniously integrates digital oscilloscope, electronic component tester, PWM signal generator and other functions into one.Equipped with large-size color dot matrix TFT display.Built-in rechargeable lithium battery.Bring more practical functions to users with a small size,Also has good portability.
FNIRSI-TC2 has various working modes such as oscilloscope and component tester.Each time you click the power button, it will enter the mode selection interface.Press the "Up" and "Down" keys of the direction keys to select,Select "Mos Test" item, press"OK"key to enter component tester mode;Select the "Oscilloscope" item, press"OK"key to enter the oscilloscope mode
"Mos Test" mode can test various types of transistors, and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance; can test capacitance, resistance, inductance components, etc.
FNIRSI-TC2 is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small batch components.
"Oscilloscope" mode to test the signal waveform of the circuit.Support online operation with computer, you can refresh the official firmware by yourself and complete the upgrade.
It is hoped that FNIRSI-TC2 can make the study and work of the majority of users more efficient and interesting.

Technical Parameter:

FNIRSI DSO-TC2 Equipment Parameters:
Display: 2.4 inch TFT color screen, LED backlight
Powered by: 1500mAh rechargeable lithium battery
Charging: USB Type-C, +5V
Size: 79 x 31 x 103mm (L x W x H)
Bracket: Hidden Support fram

Specifications Of Oscilloscope Mode:
The oscilloscope has a real-time sampling rate of 2.5MS/s and a 200kHz bandwidth
With complete trigger function (Single, Normal, Automatic), it can be used freely for both periodic analog signals and aperiodic digital signals
Up to ±400V voltage signal can be measured
Equipped with efficient one-key AUTO, the measured waveform can be displayed without cumbersome adjustment
Self-contained 80kHz /5.0V PWM wave test signal source with adjustable duty cycle

Real-time sample rate

2.5MS/S

Analog bandwidth

0〜200kHz

Input resistance

1MΩ

Coupling

AC/DC

Test voltage range

1:1 probe: 80Vpp (±40V)

10:1 probe: 800Vpp (±400V)

Vertical sensitivity

10mV/Div 〜10V/Div (in 1-2-5 increments)

Vertical displacement

Adjustable, with indication

Horizontal time base range

10us/Div 〜500s/Div (in 1-2-5 increments)

Trigger mode

Automatic, Regular and Single

Trigger type

Rising edge, falling edge

Trigger level

Adjustable, with indication

Waveform freeze

Yes (HOLD function)

Automatic measurement

Maximum, minimum, average, rms, peak-to-peak, frequency, period, duty cycle

PWM output

FRQ: 0〜80KHz, Duty cycle: 0~100%, Amplitude: 5.0V


Technical Parameters Of Transistor:
This instrument can automatically identify and measure various transistors.Including NPN and PNP transistors, N-channel and P-channel field effect transistors, junction field effect transistors, diodes, double diodes, thyristors, etc.,and passive components such as resistors, inductors, capacitors, etc.
Automatic detection of pin definitions
It can automatically parse the infrared code of the NEC protocol
Other functional modes: including circuit continuity test, 0~16V input voltage measurement, PWM output, 0~24V Zener diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement, etc.

Category

Scope

Technical Parameter

Triode

*

Magnification hfe, base-emitter voltage Ube, Ic/le, collector-emitter reverse cut-off current Iceo, Ices, protection diode forward voltage drop Uf â‘ 

Diode

Forward voltage drop<5V

Forward Voltage Drop, Junction Capacitance,Reverse Leakage Currentâ‘¡

Zener diode

0.01 〜4.5V

(1-2-3 test area) forward voltage drop, reverse breakdown voltage

0.01 〜24V

(K-A-A test area) reverse breakdown voltage

FETâ‘¢

J FET

Gate capacitance Cg, drain current Id at Vgs, protection diode forward voltage drop Uf â‘£

IGBT

Drain current Id at Vgs, protection diode forward voltage drop Ufâ‘£

MOSFET

Turn-on voltage Vt, gate capacitance Cg, drain-source resistance, protection diode forward voltage drop Ufâ‘£

SCRS

Turn-on voltage <5V, gate trigger current <6mA

Gate voltage

Triac

Capacitance

25pF 〜100mF

Capacitance value, loss factor Vloss ⑤

Resistance

0.01Ω〜50Ω

resistance

Inductance

10uH 〜1000uH

Inductance value, DC resistanceâ‘¥

Battery

0.1 〜4.5V

Voltage value, positive and negative polarity

Input voltage

0~16V

Voltage value

DS18B20

*

Temperature

DHT1

*

Humidity

PWM output

1.5kHz 〜9.99MHz

*

Infrared remote control decoding

NEC protocol infrared code

Display user code and data code, and display the corresponding infrared waveform

Note â‘ : Ices, Iceo, Uf are displayed only when valid
Note â‘¡: Junction capacitance and reverse leakage current are displayed only when valid
Note â‘¢: The turn-on or turn-off voltage of the FET must be less than 5V
Note â‘£:  Displayed only when there is a protection diode
Note ⑤: Vloss is only displayed when valid
Note â‘¥:  Two-pin component and inductance measurement when the resistance is less than 2.1kΩ

Package included:

Standard version:

1 x DSO-TC2 tester
1 x Type-C cable
1 x Test book
1 x Regular probe

Upgrade version:

1 x DSO-TC2 tester
1 x Type-C cable
1 x Test book
1 x Regular probe
1 x Adapter
1 x P6100 high power probe