Price: 0.0296702 BTC
About 10.5kg (net weight)
AC output voltage
110V US Plug
220V EU Plug
AC output power
999Wh (1000W 270000mAh)
More than 90% for adapter 8.5H more than 90% for Quick charge 2.5H
Temperature range for use
Temperature range for storage
18W 12V/10A 13.8V/5A
-Press and hold the "AC start switch" â‘¯ for 3 seconds to turn on or off the AC software.
-The AC ON icon of DC on the power LED screen will be on / display the current output voltage, then the device can be used normally by arbitrarily inserting the load wire into AC output port 1 or port 2, and the current power will be displayed on the display screen.
(Note: please do not use loads that exceed the maximum output power of the equipment. The maximum output power of the equipment is 1000W. If the load exceeds 1000W, the power supply will enter the protection state and cannot be output, and the power supply can be used normally after removing the excess load and restarting.)ã€€
Charge the device:
1. Insert the original standard adapter (25.5V/8A) into the "adapter charge port" â‘°
2. Insert the output port of in-vehicle cigar lighter or solar panel with the specification of 18V / (â‰¥ 150W) into the "vehicle charge / solar charge port" â‘¡ of the equipment
3. Insert the quick charger (25.2V/15A) into the "quick charge port" â‘£After arbitrarily inserting the above three charge methods, the current charge power will be displayed on the LCD display screen of the device, and the battery symbol % will also display the battery charge power one by one.
1. The energy storage power supply needs to be stored in a dry environment. The correct storage method can prolong the service life of the energy storage power supply.
2. If the product is not used for a long time, please charge and discharge the product every 3 months to improve the service life of the product cell.
3. Do not store the product in a place where the temperature is too high or too low. Too high or too low ambient temperature will shorten the service life of electronic products and seriously damage the product shell.
4. Do not wipe the product with corrosive chemical solvents. The appearance stains can be wiped with a cotton swab dipped with a small amount of anhydrous alcohol.
5. The product must be handled carefully when being us and please do not fall or disassemble it violently.
6. There is high voltage in this product. Please do not disassemble it by yourself to avoid safety accidents.
1 x Portable power station
1 x Adapter
1 x Battery charge clip
1 x USB Manual